ESENWhatsApp
Via ferratas / Gear

Practical guide · Via ferrata gear The energy absorber, explained simply

What the via ferrata energy absorber is, how to use it and when it has to be replaced. And what else you need: harness, helmet, gloves and footwear.

What a via ferrata energy absorber is

The energy absorber is the piece that connects you to the via ferrata cable. It is Y-shaped: two elastic arms, each with its own carabiner, and in the middle an energy absorber, usually a stitched webbing that tears open if you fall.

On a via ferrata, if you fall, you slide down the cable to the anchor below, and you can fall several metres. The absorber slows that fall down gradually, so the jolt that reaches your body and the anchor is not dangerous. That is why an ordinary sling or rope will not do: without an absorber, that jolt can break the gear or hurt you badly.

Certified energy absorbers follow the European standard EN 958, designed for people from 40 to 120 kilos (the 40 without the gear; the 120 with it). Their carabiners are a special via ferrata type: large and self-closing, so you can open and close them with one hand.

At Montania you are guided by Aitor Martínez, author of Ferratas del Levante Peninsular (Ediciones Desnivel, 2019), the guidebook to the via ferratas of the Valencian Community and the Region of Murcia.

A group wearing helmets, harnesses and energy absorbers listens to the guide before starting the via ferrata

How to use it: the two-carabiner rule

Four rules we repeat on all our outings and on the beginner course.

Both carabiners, always on the cable
From the first metre to the last. That way, if one fails or you open it by mistake, the other still holds you.
At each anchor, one at a time
When you reach an anchor, move one carabiner across first and then the other. Never unclip both at once.
One person on each section of cable
Between two anchors, only one person. If someone falls, they do not drag down the person below.
If there is a storm, off the via ferrata
The steel cable attracts lightning: if a storm is coming, you get off or you do not start.

The rest of the gear

The energy absorber, the harness and the helmet are the safety gear. The rest is for comfort.

Harness
A climbing harness, certified (standard EN 12277) and well adjusted at the waist and legs. The absorber is attached to its central loop, as the manufacturer indicates.
Helmet
A mountain helmet, certified (standard EN 12492). It protects you from stones knocked down by people above and from bumps against the rock. You wear it for the whole via ferrata, including on the approach to the wall.
Gloves
Short, cycling style. They are not compulsory, but they protect your hands from the cable and the rungs.
Footwear
Mountain footwear with a good sole. Smooth trainers slip on the rock and on the rungs.
Backpack, water and food
Small, about 25 litres, with a litre and a half of water, something to eat, sunglasses, sun cream and a cap.

When an energy absorber must be retired

An energy absorber does not warn you when it stops protecting you. Retire it if any of these things happen.

It has stopped a fall
If the absorber webbing has torn open, even a little, it no longer protects in the same way.
It has reached the end of its service life
The one the manufacturer gives in its instructions, even if it looks new.
It is damaged
Cut, burnt or badly worn arms, or carabiners that do not close by themselves.
It has been recalled
Some models have been withdrawn because of faults. If yours is old, check the manufacturer's website.

Rent, buy or come with a guide

If you come with us, the kit is included on every outing, and the guide checks it before starting.

If you go on your own, we rent the full kit in Valencia city: harness, via ferrata energy absorber, anchor lanyard and helmet, for €25 a day, €50 for two days or €105 for five days.

And if you want to learn to use it on your own, the beginner via ferrata course is 16 hours over two days, with a maximum of 4 students. To choose which one to start with, see our guide to via ferratas in Valencia.

Frequently asked questions about via ferrata gear

What people ask us most. If you have any questions, message us on WhatsApp.

Can I do a via ferrata with a sling or a rope instead of an energy absorber?

No. Without an energy absorber, the jolt of a fall on a via ferrata can break the gear or injure you. Always use a certified energy absorber (standard EN 958).

Is there a minimum weight to use the energy absorber?

Standard EN 958 is designed for people from 40 to 120 kilos. Below 40 kilos the absorber may not slow the fall properly and extra measures are needed, such as being roped up. With us, the minimum age is 14.

How often should an energy absorber be replaced?

When the manufacturer says so in its instructions, and always after it has stopped a fall and the webbing has torn open.

What does your rental kit include?

Harness, via ferrata energy absorber, anchor lanyard and helmet, all certified and checked. It costs €25 a day. See the rental

Do I have to buy the gear for a guided outing?

No. On our outings and courses the kit is included.

With a qualified guide · Gear included

Shall we do your first via ferrata?

With a qualified guide and all the gear included, from €55. Message us with the date and number of people and we will confirm straight away.